10 Ton Remote Computer Control Perpendicular Puncture Battery
Testing Equipment for SAE J2464
Product Description:
The testing machine is used for the battery penetrating test by
simulating the acupuncture by sharp objects when pack, transport, reserve, use and dispose batteries. The result of the test can be
used to evaluate the safety performance of the battery.
Acupuncture test method:
Single Battery: Use the High temperature Resistance steel needle At a speed of (25
± 5) mm / s, from the direction perpendicular to the battery plate,
the penetration position should be close to the geometric center of
the surface, the steel needle stays in the battery, observe 1
hour(Diameter of the needle is Φ5mm ~ Φ8mm, The taper angle of the
needle tip is 45°~60°, the surface of the needle is smooth, free
from rust, oxide layer and oil stain.)
Modular accumulator:
Use the High temperature Resistance steel needle At a speed of (25
± 5) mm / s, from the direction perpendicular to the battery plate,
the penetration position should be close to the geometric center of
the surface, at least Pierce through 3 single battery, the steel
needle stays in the battery observe 1 hour(Diameter of needle is
6mm ~ Φ10mm, The taper angle of the needle tip is 45°~60°, the
surface of the needle is smooth, free from rust, oxide layer and
oil stain.)
Product Specifications:
| Drive | Hydraulic drive |
| Max capacity | 80T(or customized) |
| Load sensor | High precision load sensor with the resolution of 1/10,000 |
| Display accuracy | ±10.0kg |
| Unit | kgf ,lbf ,N, KN, Kpa, Mpa |
| Puncture | Stroke | 500mm(adjustable, can customize) |
| Speed | 10—40mm/s |
| Steel needle | Diameter of 3mm to 8mm |
| Distance between the needle and the sample | 300mm(or customized) |
| Clap distance | 500mm(or customized) |
| Clap method | Manual clamping,or fixture customized |
| Structure | Box material | Interior box: SUS#304 stainless steel Outward box:cold-roll steel sheets with paint |
Observing window | 300*300mm,depth of 10mm |
| Ventilation facility | exhaust fan with diameter of 150mm, exhaust pipe can connect to
exhauster |
| Safety device | Separate the control box and test box. |
| Light | High-brightness light |
| Power | 380V , 50~60HZ,10A |
Reference standard:
GB/T 31485-2015 Safety requirements and test methods for traction
battery of electric vehicle
QC/T 741-2014 Ultra-capacitor for electri vehicles
QC/T 742-2006 Lead-acid batteries for electric vehicles
QC/T 743-2006 Lithium-ion batteries for electric vehicles
QC/T 744-2006 Nickle-metal hydride batteries for electric vehicles
Picture:
