Lithium Battery Safety Testing Equipment , Cell Battery Penetration
Testing Equipment
1. Product Name: Battery crush and puncture machine
2. Product Model:GX-5067-A
3. Test Methods:
Crush Test:
The battery is to be crushed between two flat surfaces. The force
for the crushing is to be applied by a hydraulic ram with a 32mm
diameter piston. The crushing is to be continued until a pressure
reading of 17.2 Mpa is reached on the hydraulic ram, resulting in
an applied force of 13KN.Once the maximum pressure has been
obtained it is to be released.
Puncture Test:
Put the battery into the testing room and use the steel needle with
the diameter of 2-8mm and speed of 10-40mm/s to penetrate the
battery, keep for 5 seconds. The test should be conducted under the
condition of 20°C±5°C and ventilation.
4.Test standard:
SJ/T11169-1998(equal to UL 1642:1995),SJ/T11170-1998(equal to
UL2054:1997),UL 1642[13],GB8897.4—2002, IEC60086-4:2000
UN38.3, IEC62133, SAE-J2464, GB31241, UL1642, UL2054, YD/T 2344,
YD1268, YDB032, IEC60086-4, IEC 62281, MH/T 1052, MT/T 1051
FAQ
Q1: What is the warranty for the equipment?
A1: Warranty for the equipment is 1 year,and free lifelong
technical support is available through video email.
Q2: What is the payment way?
A2: T/T ; 50% deposit and 50% before shipment.
Q3: How long the delivery time is?
A3: Generally,the delivery time is about 15-25 days, except for the
special customization.
Q4: How to prove your product is qualified?
A4:The production of all equipments are strictly supervised to
ensure quality. We have got various relevant certification
including ISO,ASTME,DIN,JIS,UL ,BS and so on. What is more, we will
carefully make installation and debugging before shipment.
Q5:Is the package strong enough for long-distance shipment?
A5:Sure.We use strong and standard wood case for the package and we
will buy insurance for each shipment.
